Using the GreenIQ Smart sprinkler system, you can manually activate irrigation in a zone at any time.
To start manual irrigation:
- From the main screen, select the desired zone. You are being transferred to the zone screen.
- On the Zone screen, turn on the Activate Manually switch.
Note: If the Enable Zone switch is off, it automatically turns on when manual irrigation is enabled.
3. In the popup window that is displayed, enter the number of minutes to irrigate the zone and tap OK.
The progress of irrigation in the zone is indicated on the main screen.
Tip: You can stop the manual irrigation while it is in progress by turning off the Activate Manually or the Enable Zone switch.