GreenIQ Smart irrigation system can control landscape lighting. To complete the installation you will need an external relay (available from the GreenIQ on-line store). A relay has two major ratings: coil rating and contact rating.The GreenIQ Smart Garden Hub supports relay coil ratings of 24VAC and up to 50mA. The relay contact rating should be determined based on your landscape lighting voltage and maximum electrical current.
Warning: The relay should only be wired by an authorized electrician.
Wiring: Wire the lighting relay so that A1 would be connected to the black wire of cable 1 and A2 would be connected to the white wire of cable 2.
The following figure shows an example of an electrical scheme.
For further information, go to: